Phones answered every hour of the day
Plus same- or next-day visits in Lithia Springs.
A pipe burst upstairs, the roof leaked through the kitchen ceiling during a storm, the dishwasher hose let go or water spread across the floor from the laundry room. The water is cleaned up, but the appliances nearby are not the same: the range will not light, the oven control is dead, the refrigerator trips the outlet, a burner sparks by itself or the freezer's fan sounds rough. In Lithia Springs, Georgia, Switch Appliance Repair starts with that water: where it came from, how high it reached and which appliances it touched. Water in the wrong place can damage controls, wiring, motors and insulation, and it can also bring to light a part that was already wearing out.
Call (470) 319-8098 around the clock, or describe where the water went and enter your ZIP code in the form on this page. Same- or next-day visits are offered in Lithia Springs when the route allows.

A broken appliance does not need to drag the whole house down with it. If the fridge is warming up, the washer is leaking, the dryer won't heat, or the oven quit before dinner, Switch Appliance Repair is ready to step in.
Get sharp diagnostics. Get your house back in rhythm.
Our service area depends on the appliance. Choose the appliance first, then enter your ZIP code.
Central Lithia Springs. Streets near the old center and the historic springs area.
Near Sweetwater Creek. Neighborhoods on the eastern side.
Toward Austell. Homes to the northeast.
Toward Douglasville. Residential areas to the west.
Sometimes it dries out: a burner that sparked while wet and works normally once dry, a touch panel that recovers after a few days unplugged, a GFCI outlet that resets once moisture is gone.
Worth a technician's check: any appliance that stood in water above its base, a control that stays dead after drying, an outlet that keeps tripping, a burning smell, a range that sparks continuously, rust or corrosion on terminals, or a refrigerator whose compressor area was submerged.
Do not plug in or switch on any appliance that stood in water until it has been checked. If water reached outlets or the breaker panel, have an electrician inspect them first. Turn off the gas to a range that was flooded and do not try to light it. If you smell gas at any time, leave the home and call the gas company before calling us.
You tell us what changed. Where the water came from, how high it reached and what each appliance does now.
We check for water damage first. Controls, terminals, wiring, connectors and insulation are inspected for moisture and corrosion.
Then the working parts. Motors, igniters, spark modules, valves and boards are tested.
You hear the cause. Whether the water did the damage or uncovered a part already near failure.
Repairs proceed only with your approval. Genuine or OEM-approved parts are fitted, and every appliance we touch is tested before we leave.
Warranty on the work: up to six months on standard repairs and up to a year on Sub-Zero, labor and parts both.

Before anything is switched back on, give the area time to dry. Pull the refrigerator and the range away from the wall if you can do so safely, so air reaches the floor and the back panels. Run fans and a dehumidifier, and leave lower cabinet doors open. Wipe standing water from under the appliances and remove the kick plates to let the base area air out. Water that sits under a refrigerator or inside a cabinet base keeps feeding corrosion, so the sooner it is dry, the better the chance that controls and motors survive.
If your homeowner's insurance is involved, ask the technician for a short written note describing the damage and the repair. Many claims require a description of what was affected and why. Photographs taken before cleanup also help.
If the refrigerator lost power or stood in floodwater, check temperatures before eating anything. Throw out food that touched floodwater. Perishables above 40°F for 2 hours or more should be discarded, according to USDA guidance.
Switch repairs Whirlpool, GE, Frigidaire, Samsung, LG, Maytag, KitchenAid, Electrolux, Kenmore and Amana, plus Sub-Zero, Wolf, Viking, Thermador, Bosch, Miele, Monogram, JennAir, Cafe and Fisher & Paykel, in Lithia Springs. Brand names are used for identification only. Switch Appliance Repair is an independent repair company and is not affiliated with, sponsored by or endorsed by any appliance manufacturer.
After water damage, the repair may be a spark module, an igniter, a fan motor, a relay, a control board or a section of wiring. Replacing the appliance makes sense when floodwater reached the compressor and the cabinet insulation on an older refrigerator, or when a board is no longer available. You hear both options and choose.
Switch serves all of Lithia Springs. Our technicians also travel to Austell, Douglasville, Mableton, Powder Springs and Hiram. The form reads your ZIP code and confirms coverage immediately.
Call (470) 319-8098 at any hour, or use the form to share where the water went, what changed and your ZIP code. A technician checks for water damage and tests the working parts, then explains what is going on. Switch Appliance Repair: 160 Clairemont Ave, Decatur, GA 30030.
Plus same- or next-day visits in Lithia Springs.
Including water that reached the kitchen.
Refrigerant work.
Of appliance repair.
And the coverage written down.
Switch Appliance Repair is family-owned. In Lithia Springs, we check every part the water could have reached, because damage from a leak often shows up later than the water itself.
Yes. Enter the ZIP code of the house in the booking form to double-check, or dial (470) 319-8098.
Wait until it has been checked, especially a gas range or one with a touch control. Water can damage the spark module and the board.
Not until it has been inspected. The compressor terminals, the relay and the fan motor sit near the floor.
A wet spark switch or module. It may stop once dry; if not, the part needs replacing.
Yes. Ask the technician for a short written description of the damage and the repair.
Same- or next-day visits are offered in Lithia Springs when the route allows; ordered parts can add time.
Throw out anything that touched the water, and check temperatures for everything else.
Parts and labor, with up to six months on standard work and up to twelve months on Sub-Zero.
One call sets up a visit, usually same- or next-day across Atlanta and nearby communities.